 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20192 rev. H 12/03 16CTQ... 16CTQ...S 16CTQ...-1 SCHOTTKY RECTIFIER 16 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM VF TJ @ tp = 5 s sine @ 8 Apk, TJ = 125C (per leg) range Description/ Features Units A V A V This center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175 C TJ operation Center tap configuration Low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Values 16 60 / 100 850 0.58 - 55 to 175 C Case Styles 16CTQ... 16CTQ...S 16CTQ...-1 TO-220 D2PAK TO-262 www.irf.com 1 16CTQ..., 16CTQ...S, 16CTQ...-1 Bulletin PD-20192 rev. H 12/03 Voltage Ratings Parameters VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 16CTQ060 16CTQ060S 16CTQ060-1 16CTQ80 16CTQ80S 16CTQ80-1 16CTQ100 16CTQ100S 16CTQ100-1 60 80 100 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 (Per Leg) (Per Device) Values 8 16 850 275 7.50 0.50 Units A Conditions 50% duty cycle @ T C = 148C, rectangular wave form Following any rated 5s Sine or 3s Rect. pulse load condition and with 10ms Sine or 6ms Rect. pulse rated V RRM applied TJ = 25 C, IAS = 0.50 Amps, L = 60 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) A mJ A Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Values Units 0.72 0.88 0.58 0.69 0.55 7.0 0.415 11.07 500 8.0 10,000 V V V V mA mA V m Conditions @ 8A @ 16A @ 8A @ 16A TJ = 25 C TJ = 125 C TJ = TJ max. TJ = 25 C TJ = 125 C VR = rated VR IRM Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) pF nH V/ s VR = 5VDC, (test signal range 100Khz to 1Mhz) 25C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range Values Units -55 to 175 -55 to 175 3.25 1.63 0.50 2 (0.07) Min. Max. 6 (5) 12 (10) C C Conditions RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight Mounting Torque C/W DC operation C/W DC operation C/W Mounting surface , smooth and greased (only for TO-220) g (oz.) Kg-cm (Ibf-in) 2 www.irf.com 16CTQ..., 16CTQ...S, 16CTQ...-1 Bulletin PD-20192 rev. H 12/03 1000 100 10 1 0.1 0.01 0.001 0.0001 TJ = 175C 150C 125C 100C 75C 50C 25C Ins tantaneous Forwa rd Current - I F (A) 100 R everse Current - I R (mA) 0 20 40 60 80 100 R everse Voltage - VR (V) TJ= 175C TJ= 125C 10 TJ= 25C Junction Capacitance - C T (pF) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 1000 TJ= 25C 1 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 100 0 20 40 60 80 100 Forward Voltage Drop - V FM (V) R evers Volta ge - V R (V) e Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 10 Thermal Impedanc e Z thJC (C/ W) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 1 P DM 0.1 t1 0.01 Notes: S ingle Pulse (T hermal R esistance) t2 1. Duty fac tor D = t1 / t 2 2. Peak T = P x Z thJC+ TC J DM 0.1 1 10 100 0.001 0.00001 0.0001 0.001 0.01 t 1 , Rec tangular Pulse Duration (S econds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 16CTQ..., 16CTQ...S, 16CTQ...-1 Bulletin PD-20192 rev. H 12/03 180 Allowab le Case T emperature - (C) 7 Average Power Los - (Watts) s 6 5 4 3 2 1 0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMSLimit DC 170 160 150 140 S qua re wave (D = 0.50) 130 80% Ra ted V a pplied R DC 120 110 see note (2) 100 0 2 4 6 8 10 12 14 0 2 4 6 8 10 12 Average F orward Current - I F(AV) (A) Average F orwa rd Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Non-Repetitive S urge Current - I FS (A) M 1000 Fig. 6 - Forward Power Loss Characteristics (Per Leg) At Any Rated Load Condition And With Rated VRRM Applied Following S urge 100 10 100 1000 10000 S quare Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L HIGH-S PEED S CH WIT FREE-WHEEL DIODE 40HF L40S 02 + DUT IR P460 F R = 25 ohm g Vd = 25 Volt CURRENT MONIT OR Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 10 V 4 www.irf.com 16CTQ..., 16CTQ...S, 16CTQ...-1 Bulletin PD-20192 rev. H 12/03 Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 123 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 2.89 (0.11) 2.64 (0.10) 1 2 3 1.32 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2 1.22 (0.05) 2.92 (0.11) 2.54 (0.10) TERM 2 0.10 (0.004) BASE COMMON CATHODE 2 ANODE COMMON ANODE CATHODE 1 2 123 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. 5.08 (0.20) REF. Conform to JEDEC outline TO-220AB Dimensions in millimeters and (inches) 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) 0.55 (0.02) 0.46 (0.02) 3X BASE COMMON CATHODE 2 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) 1.14 (0.045) 2X MINIMUM RECOMMENDED FOOTPRINT 11.43 (0.45) 1 1 2 3 3 4.57 (0.18) 4.32 (0.17) 2 0.61 (0.02) MAX. 5.08 (0.20) REF. 8.89 (0.35) ANODE COMMON ANODE CATHODE 1 2 17.78 (0.70) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) 2X Conform to JEDEC outline D Pak (SMD-220) Dimensions in millimeters and (inches) 2 www.irf.com 5 16CTQ..., 16CTQ...S, 16CTQ...-1 Bulletin PD-20192 rev. H 12/03 Outline Table Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) BASE COMMON CATHODE 2 1 2 3 ANODE COMMON ANODE CATHODE 1 2 Marking Information THIS IS A 16CTQ100S WITH LOT CODE 58 07 ASSEMBLED ON WW 21, 2000 IN THE ASSEMBLY LINE "L" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER 16CTQ100S DATE CODE YEAR 0 = 2000 WEEK 21 LINE L 6 www.irf.com 16CTQ..., 16CTQ...S, 16CTQ...-1 Bulletin PD-20192 rev. H 12/03 Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) FEED DIRECTION 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) 1.85 (0.073) 1.65 (0.065) 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 1.75 (0.069) 24.30 (0.957) 23.90 (0.941) TRL 10.90 (0.429) 10.70 (0.421) 1.25 (0.049) 16.10 (0.634) 15.90 (0.626) DIA. 4.72 (0.186) 4.52 (0.178) FEED DIRECTION 13.50 (0.532) 12.80 (0.504) DIA. 26.40 (1.039) 24.40 (0.961) 360 (14.173) DIA. MAX. 60 (2.362) DIA. MIN. SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and T RR. Dimensions in millimeters and (inches) Ordering Information Table Device Code 16 1 1 2 3 4 5 6 - C 2 T 3 Q 4 100 5 -1 6 Essential Part Number C = Common Cathode T = TO-220 Q = Schottky Q Series Voltage Rating 1 = TO-262 S = D2Pak 060 = 60V 080 = 80V 100 = 100V www.irf.com 7 16CTQ..., 16CTQ...S, 16CTQ...-1 Bulletin PD-20192 rev. H 12/03 16CTQ100 ******************************************** * SPICE Model Diode * ******************************************** .SUBCKT 16CTQ100 ANO CAT D1 ANO 1 DMOD (0.07089) *Define diode model .MODEL DMOD D(IS=21.21E-06,N=1.578,Rs=7.804E-03,Ikf=0.9497, Xti=2, Eg=1.11 + Cjo=1.278E-09, M=0.4736, Vj=0.4972, Fc=0.5, Irs=1.114e-21, Nr=4.755, + Bv=119.9, Ibv=215.5E-06, Tt=18.2E-09) ******************************************** .ENDS 16CTQ100 Thermal Model Subcircuit .SUBCKT 16CTQ100 5 1 CTHERM1 CTHERM2 CTHERM3 CTHERM4 RTHERM1 RTHERM2 RTHERM1 RTHERM1 5 4 3 2 5 4 3 2 4 3 2 1 4 3 2 1 1.45E+00 4.54E+00 1.09E+01 1.01E+02 2.49E+00 5.20E-04 5.43E-01 3.05E-02 .ENDS 16CTQ100 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/03 8 www.irf.com |
Price & Availability of 16CTQ80
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |